Dura Dump Bodies
Bodies & Trailers
Dump Bodies
Pup Trailer
Van Bodies
Platform Bodies
Expanding Side/Specialized Trailers
Williamsen Dura Dump Bodies in a
full Range of sizes
, featuring:
Longitudinal design creating greater torsion resistance against twisting.
Barless construction - less weight & maintainance.
Built to specifications.
Specifications
18K
Length 10' to 20' long in 6" increments Width 96" overall - 84" inside Optional - 102" overall Height Straight Sides: 18"- to 62"-high sides in 2" increments Tapered Sides: TS Model: 45" at front, 33" at rear HTS Model: 62" at front, 48" at rear Side Construction 10-gauge, 70,000 PSI high-strength steel. 6" boxed, sloping top and bottom rails combined with side floor to form "I" beam sides that provide extra strength and durability. 7-gauge, 70,000 PSI high-strength steel 20" x 6" rear corner post for added strength with recess for lights. Options: � 7-gauge 70,000 PSI high-strength steel. � 1/4" 400 BHN 180/220,000 PSI abrasive- resistant steel. � One, two, three or four horizontal side braces. Front 3/16" 70,000 PSI high-strength steel. 62" high with 2 horizontal braces. Floors 3/16" 70,000 PSI high-strength steel with side floor formed in one piece. Options: � 3/16" or 1/4" 400 BHN 180/220,000 PSI abrasive-resistant steel � Wood cushion � Double-overlaid construction Lights Recessed Trucklite� sealed system that complies with DOT and FMVSS108. Options: � LED system � Betts sealed system Tailgate Double-paneled 3/16" 70,000 PSI steel, fully boxed perimeter with integral-formed horizontal brace. Straight type, with manual-operated hardware. Positive, overlocking, flame-cut hardware. Recessed upper tailgate hinges Options: � 3/16" or 1/4" 400 BHN 180/220,000 PSI steel inner panel � Sloping gate � Air-operated hardware, 6" spring brake chamber with air to open, spring to close. � Tailgate chains Cylinder Housing For inboard or outboard mounted cylinder. Understructure: Barless (no crossbars) design with 8" x 15# wide-flange "I" beam stringers. Options: � 10" x 15# stringers � 9" trapezoidal shaped stringer � 4" crossbars (nested or stacked) on 12" or 16" centers Other Options � Air-operated folding mud flap brackets � Spreader aprons � Walk rails, 5/8" rebar or 1 5/8" ladder rungs � Grip strut steps with grab handles � Vertical side braces � Front corner posts � Side boards � Additional horizontal & vertical tailgate braces � Lever-actuated or rotary-type asphalt gates � Double-link tailgate hinges � Extended-top tailgate hinges � Watertight tailgate � High-lift double-linked tailgate - hydraulic or air operated � Rubber cushion strips on stringers � Asphalt rear-end